Table of Contents
Advertisement
Secure side body panel (1) by tightening screw (2).
Repeat this procedure on the vehicle opposite side.
Remove the side body panels
(Fitting the airbox
cover).
Remove the fuel tank
(Refitting the fuel
tank).
Remove the seat
(Refitting the
seat).
Airbox cover assembly
RH airbox cover
Position the RH airbox cover (5) so that the upper end is under the tank cover (B).
Start the upper retaining screw (4) of the RH airbox cover (5) and the lower screws (6) with the relevant
washers.
Tighten screws (6) to a torque of 8 Nm ±10% and screw (4) to a torque of 5 Nm ±10%.
Advertisement
Table of Contents
