Tensioning And Centering Operation - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Then check the lateral and axial runout as already described before.

Tensioning and centring operation

Remove the tyre and the tube from the rim and position the wheel on the centring tool (B) no. 88713.2775

using suitable spacers (F).

Block the wheel pack checking for no end float.

Check the rim axial and radial runout, as described before.

Rotate the rim: if the detected values do not fall within the specified ranges, tension or loosen the spokes

using the centring tool (G) no. 88713.2777 on the polygonal side of nipples (11).