Table of Contents
Advertisement
Setting the units of measurement: Temperature
This function allows you to change the units of measurement of the Air Temperature indications.
To gain access to this function enter the SETTING MENU, use buttons (1) and (2) to select UNITS and press
button (4).
Select TEMP option, by pressing button (1) or (2).
Once TEMP. function is highlighted, press CONFIRM MENU button (4).
When entering the function, units of measurement (°C, °F) are indicated: current unit of measurement is
flashing while the other available unit is not flashing.
Press buttons (1) and (2) to highlight the units of measurement one by one: in particular, use button (1) to
highlight the following item and button (2) to highlight the previous item. Select the required unit of
measurement and then press the CONFIRM MENU button (4) to confirm the selected unit; then the selected
unit of measurement is saved in the instrument panel and the "TEMP." indication starts flashing again.
Press button (2) to make the EXIT box flash; press button (4) to quit and go back to the previous window.
°C: if this unit is set, the following values will have the same units of measurement:
-
T – AIR: °C
-
°F: if this unit is set, the following values will have the same units of measurement:
-
T – AIR: °F
-
DEFAULT setting
This function allows setting the DEFAULT units of measurement according to the vehicle version.
To gain access to this function enter the SETTING MENU, use buttons (1) and (2) to select UNITS and press
button (4). Press button (1) or (2) to make the "UNIT:DF" option start flashing and then press button (4)
for 3 seconds.
Advertisement
Table of Contents
