Other Functions - Canon imageRUNNER 7095 Service Manual

Chapter 18

18.4.4.7 Other Functions

[5]: Backup
This function is for R&D purposes only. Do not
use it.
[6]: Restore former version (in the presence of
backup of system software)
Use it to restore the backup of the system soft-
ware while saving the system software that is cur-
rent as a backup.
<Procedure>
1) If the machine is on, go through the HDD shut-
down instructions, and turn off the main power.
2) Connect the USB device to the USB port.
3) Put the machine in download mode (normal or
safe).
4) Go through the instructions on the control
panel, and press the appropriate key.
[6] -> [0]: initialize / other than [0]: go back to
Menu screen
After execution, a message will appear asking
you to turn off and then on the power.
F-18-63
5) Turn off the main power switch, remove the
USB memory, and turn on the main power
switch.
[7]: Clear downloaded files
Use it to remove the system software files that
have been saved in the temporary storage area of
the HDD. Use it if you want to remove the files
without writing them to the HDD after download-
ing (menu [2] and [3]).
<Procedure>
1) When you have downloaded the system
software using menu item [2] or [3], go to step
2) without turning off and then on the power. (If
you already have turned off the power, start up
the machine in safe mode.)
2) Go through the instructions on the control
panel, and press an appropriate key.
18-22
[7] -> 10: execute / other than [0]: go back to
Menu screen
0011-6782
Upon execution, the Menu screen will return.
[Stop]: Shutdown (in normal mode only)
Use it to start up the shut-down sequence.
<Procedure>
1) Go through the instructions on the control
panel, and press an appropriate key.
[Stop]->[0]: execute/ other than [0]: go to Menu
screen
The shut-down sequence will be executed, and
a message will appear asking you to turn off the
power.
2) Turn off the main power switch, and remove
the USB device.
F-18-64
F-18-65