Canon imageRUNNER 7095 Service Manual page 163

5.4.13.4 Fitting the Scanner Drive Cable
1) Put the ball of the cable into the hole of the
drive pulley [1], and wind the cable (4 times
inside; 5 times outside); then, tape it in place.
At this time, make sure that the cable fixing [2]
is on the inside.
2) Fit the cable on the pulleys; then, fit one end on
the left side hook [3] and the other end on the
right side hook [4].
3) Temporarily fix the cable fixing plate [2] in
place on the No. 1 mirror base [5].
4) Mount the reader unit upper frame.
[2]
[3] [3]
F-5-165
[1]
[1]
[4] [5]
[4]
[2]
0011-7983
Chapter 5
[4] [5]
[4]
F-5-166
5-45