Test (Test Print Mode) - Canon imageRUNNER 7095 Service Manual

Chapter 17

17.7 TEST (Test Print Mode)

17.7.1 COPIER
17.7.1.1 COPIER Items
<PG>
Sub item
TYPE Use it to select a type of test print.
<Procedure>
1) Select the item, and type in the number of the test print you want.
2) Press the Start key so that test printing starts.
3) When done, put back the value to '0'.
settings: 0 to 50
0: image from CCD (normal print); 1: grid; 2: 17-gradation (error diffusion); 3: 17-gradation
(dither screen); 4: blank; 5: halftone 80H (error diffusion); 6: halftone 80 H (dither screen); 7:
solid black; 8: horizontal lines (space: 27 dots; line width: 40 dots); 9: horizontal lines (space:
50 dots; line width: 60 dots); 10: horizontal lines (space: 3 dots; line width: 2 dots); 11: halftone
60 H (error diffusion); 12: halftone 60 H (dither screen); 13: halftone 30 H (error diffusion);
14: halftone 30 H (dither screen); 31: 1200-dpi vertical lines (space: 21 dots; line width: 8
dots); 32: 1200-dpi horizontal lines (space: 21 dots; line width: 8 dots); 33: for check on
displacement of image in main scanning direction
TXPH Use it to set the image mode for test printing.
settings: 0 to 4
0: text (default); 1: photo; 2: auto; 3: text/photo/map; 4: film print
PG-PICK Use it to select the source of paper for test printing.
settings: 1 to 8
1: right deck (default); 2: left deck; 3: cassette 3; 4: cassette 4; 5: side paper deck; 6: manual
feeder tray; 7 to 8: not used;
2-SIDE Use it to set the output mode for test printing.
settings:
0: simplexing; 1: duplexing
PG-QTY Use it to set a copy count for test printing.
setting:
1 to 999 (default: 1)
<NETWORK>
Sub item
PING Use it to issue the PING command.
Use it to check the connection between the machine and the network (TCP/IP only).
Use it to check the connection to the network at time of installation or when suspecting a fault
in the connection to the network.
17-88
T-17-68
COPIER > TEST > PG
Description
T-17-69
COPIER > TEST > NETWORK
Description
0011-6092
Level
1
1
1
1
1
Level
1