Motor Driver Pcb; Transceiver Pcb - Canon imageRUNNER 7095 Service Manual

Chapter 10
3) Slide out the high-voltage assembly [1] along
the rails on both sides to detach.
F-10-83

10.5.29 Motor Driver PCB

10.5.29.1 Before Starting the Work
1) Remove the main controller box cover [1].
- 10 screws [2]
[1]
[2]
F-10-84
2) Remove the rear cover [1].
- 1 reader power supply cable [2]
- 8 screws [3]
[2]
[3]
F-10-85
10-24
0011-4918
[2]
[2]
[2]
[3]
[3]
[1]
10.5.29.2 Removing the Fixing Inlet
Sensor Lift Motor Driver PCB
1) Remove the fixing inlet sensor lift motor driver
PCB [1].
- 2 connectors [2]
- 4 screws [3]
[3]
[1]
F-10-86

10.5.30 Transceiver PCB

10.5.30.1 Before Starting the Work
1) Remove the main controller box cover [1].
- 10 screws [2]
[1]
[2]
F-10-87
2) Remove the rear cover [1].
- 1 reader power supply cable [2]
- 8 crews [3]
[2]
[3]
F-10-88
0011-4919
[2]
[3]
[3]
0011-4913
[2]
[2]
[2]
[3]
[3]
[1]