Power Supply Cooling Fan 2; Separation Fan; Developing Fan - Canon imageRUNNER 7095 Service Manual

4) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the power supply
cooling fan [3].
[2]
[1] [3]
F-10-109
When mounting the fan, be sure that the direction
of air current is as indicated by the arrow.

10.5.39 Power Supply Cooling Fan 2

10.5.39.1 Removing the Power Supply
Cooling Fan 2 (FM12)
1) Remove the fan mounting base.
2) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the power supply
cooling fan 2 [3].
[1] [2]
[3]
F-10-110
When mounting the fan, be sure that the direction
of air current is as indicated by the arrow.
[1]
[1]

10.5.40 Separation Fan

10.5.40.1 Removing the Separation Fan
(FM13)
1) Slide out the fixing/feeder unit.
2) Remove the 4 screws [1], and detach the
fixing/feeding lower cover (1) [2] and the
fixing/feeding lower cover (2) [3].
[1]
3) Disconnect the connector [1], and remove the
heater 3 screws [2]; then, detach the separation
fan [3].
0010-9581
[1]
[3]

10.5.41 Developing Fan

10.5.41.1 Removing the Developing Fan
(FM15)
1) Remove the primary charging assembly.
2) Disconnect the connector [1], and remove the
2 screws [2]; then, detach the fan unit [3].
Chapter 10
[1] [3]
[2]
[1]
F-10-111
[2]
[2]
F-10-112
[2] [3]
[1]
F-10-113
0010-9580
0010-9579
10-29