Laser Cooling Fan; De-Curling Fan - Canon imageRUNNER 7095 Service Manual

10.5.34 Laser Cooling Fan

10.5.34.1 Removing the Laser Motor
Cooling Fan (FM1)
1) Remove the inside upper cover.
2) Disconnect the connector [1], and remove the
harness lock [2] from the plate.
3) Remove the 4 screws [3], and detach the laser
motor cooling fan [4].
[3]
F-10-99
10.5.34.2 Removing the Laser Cooling
Fan 1 (FM3)
1) Remove the inside upper cover.
2) Disconnect the connector, and remove the 2
screws [2]; then, detach the laser cooling fan 1
[3].
[2] [1] [3]
[2]
F-10-100
When mounting the fan, be sure that the direction
of air current is as indicated by the arrow.

10.5.35 De-Curling Fan

10.5.35.1 Removing the Curl-Removing
Fan
1) Remove the fixing/feeding unit cover.
[2]
[1]
[3]
[4] [3]
2) Remove the fixing motor base [1].
Free the cable from the edge saddle [2].
- 3 screws [3]
- 1 screws [4]
0010-9590
[3]
[3]
3) Remove the 2 screws [1], and disconnect the 2
connectors [2]; then, detach the delivery speed
switchover clutch [3].
0010-9589
[1]
When detaching the delivery speed switching
clutch, take care not to lose the bearing and wash-
er (rear only) on both sides of the clutch shaft.
4) Disconnect the 2 connectors [1], and remove
the 2 screws [2]; then, detach the curl-removing
fan [3].
0010-9586
[1]
[1]
[2]
F-10-101
[2]
[1]
[3]
F-10-102
[2]
[3]
[2]
F-10-103
Chapter 10
[4]
10-27