Double Feeding Detection Sensor ( Transmission ) - Canon imageRUNNER 7095 Service Manual

8.11.23.2 Orientation of the Separation
Roller
Keep the following in mind when replacing the
separation roller.
Wider groove
front of the machine
F-8-148
If mounted in the wrong orientation, interference
with the clamp washer can lead to faults. Take
care.
8.11.24 Double Feeding Detection Sensor
( Transmission )
8.11.24.1 Before Starting the Work
1) Slide to the fixing/feeding unit.
2) Remove the transfer/separation charging
assembly cover.
3) Remove the transfer/separation charging
assembly.
4) Remove the 2 knobs [1].
- 2 screws [2]
[2]
F-8-149
Narrower groove
rear of the machine
[1]
5) Remove the fixing/feeding unit cover [1].
- 2 screws [2]
0010-9380
[2]
6) Free the 2 cables [1] from the edge saddle [1];
then, disconnect the 2 connectors [3].
7) Remove the registration roller [4].
- 2 screws [5] (using hex wrench)
0011-8281
[3]
8) Remove the 3 screws [1].
[1]
[1]
[1]
F-8-150
[4] [5]
[2]
[2]
F-8-151
F-8-152
Chapter 8
[3]
[1]
[1]
8-51