Mounting The Fixing Assembly; Mounting The Charging Assembly - Canon imageRUNNER 7095 Service Manual

Chapter 2

2.2.4 Mounting the Fixing Assembly

1) Open the front cover.
2) Shift the fixing transport assembly release
lever [1] in the direction of the arrow (left side)
to unlock the transfer/separation charging
assembly.
[1]
F-2-18
3) Slide out the fixing transport unit [1] to the
front.
[1]
F-2-19
4) Remove the tape [1]; then, remove the tag [2]
of the fixing transport assembly and the
separation release member [3].
Remove all foreign matter (e.g., glue from tape)
from the transport belt.
[1]
F-2-20
2-10
[3]
[2]
5) Remove the tape used to keep the tag in place,
and open the delivery assembly [1]; then,
0010-8944
remove the 2 fixing nip release screws [2] from
the front and the rear.
[1]
6) Close the delivery assembly.

2.2.5 Mounting the Charging Assembly

1) Remove the screw [2], and detach the transfer/
separation assembly front cover [1].
2) Remove the fixing [1] (1 screw [2]), and
disconnect the connector [3].
[1]
F-2-21
[2]
[1]
F-2-22
[2]
[3]
F-2-23
[2]
0010-8947