Right Deck Pickup Assembly; Left Deck Pickup Assembly - Canon imageRUNNER 7095 Service Manual

8.11.3 Right Deck Pickup Assembly

8.11.3.1 Removing the Right Deck /
Cassette Pickup Assembly
The removal procedure of a right door and a left
door is the same. An illustration makes a right
door an example and explains it.
1) Slide out the right deck / cassette 3 / cassette 4.
2) Open the right upper cover and the right lower
cover.
An attempt to remove the pickup assembly with-
out removing the deck will cause the lifter to get
trapped, not holding the pickup assembly from
sliding out.
3) Remove the mounting screw [1], and detach
the connector cover [2]; then, disconnect the
connector [3].
4) Remove the three mounting screws [4], and
detach the pickup assembly [5].
[4]
[5]
F-8-59
[4]
[2]
[3]
[1]

8.11.4 Left Deck Pickup Assembly

8.11.4.1 Removing the Left Deck Pickup
Assembly
0011-8492
1) Slide out the left deck.
2) Remove the two screws [1] found on the left
and right sides of the left deck[2]; then, detach
the left deck[2].
[1]
3) Open the front cover.
4) Disconnect the connector [1] from inside the
machine, and remove the locking support [2].
5) Remove the two screws [1], and detach the two
pickup fixing plates [2]; then, detach the left
deck pickup assembly [3].
Keep supporting the pickup assembly; otherwise,
the pickup assembly could drop when the fixing
plate is removed.
[2]
[1]
F-8-60
[2]
[1]
F-8-61
[3] [2] [1] [1]
[1]
F-8-62
Chapter 8
0011-8491
8-35