Board - Canon imageRUNNER 7095 Service Manual

Sub item
PN- Use it to increase the accuracy of punch hole positioning (in the direction of horizontal registration).
SKEW
settings
0: normal mode (default); 1: hole position enhancement mode
If an increase in the accuracy of punch hole positioning is desired when the puncher unit is in use, set
it to '1'.
standard: +/-1.0 mm -> +/-0.5 mm
A trade-off will be a drop in productivity (100 -> about 80 ppm).
CNTR- Use it to set the delivery center position for the stacker.
OUT
settings
0: disable center position delivery (default); 1: enable center position delivery
This mode item is valid when a stacker is connected.

17.6.4 BOARD

17.6.4.1 BOARD Items
Sub item
FONTDL Use it to enable/disable display of the service setup screen for fonts listed by the PS kanji font
downloader.
settings
0: disable display (default); 1: enable display
MENU-1 Use it to enable/disable display of levels 1 thorough 4 for the printer setup menu.
to
settings
MENU-4
0: disable display (default); 1: enable display
SORTER > OPTION
Description
T-17-67
BOARD > OPTION
Description
Chapter 17
Level
1
2
0011-6132
Level
1
2
17-87