Canon imageRUNNER 7095 Service Manual page 145

11) Remove the reader rear cover [1].
- 2 connectors [2]
- 5 screws [3]
[2]
[3]
F-5-64
12) Remove the reader upper rear cover [1].
- 1 screw [2]
[1]
F-5-65
13) Remove the scanning lamp inside cover [1].
- 2 screws [2]
F-5-66
[1]
[2]
[1]
[2]
5.4.4.2 Before Starting the Work
<iR7086>
1) Remove the copyboard glass.
2) Remove the hopper upper cover.
3) Remove the reader right cover [1].
F-5-67
4) Remove the reader right plate [1].
- 4 screws [2]
[2]
F-5-68
5) Remove the lower left cover.
6) Remove the upper left cover.
7) Remove the reader left cover [1].
- 2 screws [2]
[1]
F-5-69
8) Remove the reader front cover [1].
- 1 screw [2]
[2]
F-5-70
Chapter 5
[1]
[1]
[2]
[1]
5-27
0011-8098