Display (Status Display Mode); Copier; Copier Items - Canon imageRUNNER 7095 Service Manual

Chapter 17

17.2 DISPLAY (Status Display Mode)

17.2.1 COPIER

17.2.1.1 COPIER Items

<VERSION>
Sub item
Use it to indicate the ROM version of a specific PCB (host machine, accessory).
- EX: <R-CON XX.YY>XX, where XX indicates a version number while YY indicates an R&D control
No.
- In the absence of a PCB, the indication will be <-,->.
DC-CON indicates the ROM version of the DC controller PCB
R-CON indicates the ROM version of the reader controller PCB
PANEL indicates the ROM version of the control panel CPU PCB
FEEDER indicates the ROM version of the ADF controller PCB
SORTER indicates the ROM version of the finisher controller PCB (master CPU)
NIB indicates the version of the network software
MN- indicates the ROM version of the main controller PCB
CONT
RIP1 not used
DIAG- indicates the ROM version of the self-diagnostic device
DVC
RUI indicates the version of the remote user interface
PUNCH indicates the version of the punch unit (inside the finisher)
LANG- indicates the version of the English language file
EN
LANG- indicates the version of the French language file
FR
LANG- indicates the version of the German language file
DE
LANG-IT indicates the version of the Italian language file
LANG-JP indicates the version of the Japanese language file
17-4
Display I/O Adjust
<ADJ-XY>
ADJ-X
xxxxx
Pressing an item displays
Value before change
it in reverse.
ADJ-X
PREV NEXT
Stop key: Stops running operations.
Clear key: Clears value.
Start key: Starts copying without exiting service mode.
F-17-8
T-17-1
COPIER > DISPLAY > VERSION
Description
Function Option Test Counter
< 1/3 > < READY >
← (yyyyy) {aaaaa to bbbbb}
Range of values that
can be entered
Entered value
+/- OK
Sets entered value.
Toggles value's sign (±).
0011-5821
Level
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1