Interface Pcb - Canon imageRUNNER 7095 Service Manual

settings and execute appropriate adjustment
items.

5.4.6 Interface PCB

5.4.6.1 Before Starting the Work <iR7105/
7095>
1) Remove the reader rear cover [1].
- 2 connectors [2]
- 5 screws [3]
[2]
[3]
F-5-81
2) Remove the reader upper rear cover.
5.4.6.2 Removing the Interface PCB
<iR7105/7095>
1) Remove the interface PCB cover [1].
- 2 screws [2]
- 8 screws [3]
[2]
F-5-82
0011-8651
[1]
0011-8654
[3]
[1]
[3]
2) Remove the interface PCB [1].
- connectors/flat cables on PCB
- 7 screws [2]
- 2 screws [3]
[2]
[3]
F-5-83
How to Disconnect the Flat Cable
Slide the locking lever [1] in the direction of the
arrow, and detach the flat cable [2].
[1]
F-5-84
5.4.6.3 Before Starting the Work
<iR7086>
1) Disconnect the 3 connectors [1].
[1]
F-5-85
Chapter 5
[2]
[1]
[2]
[1]
0011-8111
5-31