Chapter 5
5.4.12.3 Before Starting the Work
<iR7086>
1) Disconnect the 3 connectors [1].
[1]
F-5-136
2) Remove the upper rear cover [1].
- 3 screws [2]
[1]
F-5-137
3) Remove the reader rear cover [1].
- 5 screws [2]
[2]
F-5-138
F-5-139
5-40
[2]
[1]
[2]
5.4.12.4 Removing the Reader Cooling
Fan <iR7086>
0011-8146
1) Open the wire saddle [1], and disconnect the
connector [2].
2) Remove the 2 screws [3], and detach the
cooling fan [4].
[2]
5.4.13 Scanner Drive Cable
5.4.13.1 Before Starting the Work
<iR7105/7095>
1) Remove the ADF.
2) Remove the original delivery tray.
3) Remove the control panel support unit.
4) Remove the copyboard glass.
5) Remove the standard white plate.
6) Remove the upper front cover unit.
7) Remove the reader front cover.
8) Remove the reader left cover.
9) Remove the reader rear cover.
10) Remove the reader upper rear cover.
11) Remove the interface PCB cover.
12) Remove the ADF right hinge base cover [1]
and the reader upper rear right cover [2].
- 4 screws [3]
[3]
[4]
[1]
[3]
F-5-140
[2]
[1]
F-5-141
0011-9313
0011-9416
[3]