Position Of The Side Paper Deck Pickup Roller Releasing Solenoid; Fitting The Side Guide Timing Belt Of The Manual Feed Tray Assembly; Fitting The Drive Belt - Canon imageRUNNER 7095 Service Manual

Hide thumbs Also See for imageRUNNER 7095:

Table of Contents

14.8.17 Position of the Side Paper Deck

Pickup Roller Releasing Solenoid

Before removing the deck pickup roller releasing

solenoid [1] from the support plate, make mental

notes of the positions of the 2 fixing screws [2] of

the solenoid with reference to the index on the

support plate. (Or, mark the position of the sole-

noid on the support plate with a scriber.)

If you are replacing the solenoid on its own, you

must secure it in its initial position.

14.8.18 Fitting the Side Guide Timing Belt

of the Manual Feed Tray Assembly

Butt the rack plate [1] of the manual feed tray

against section A (open state).

Move the slide volume [2] in the direction of B,

and fit the timing belt [3] to the pulley [4].

Fit the drive belt to the pulleys and rollers as fol-

Developing/waste toner drive belt

Pickup motor

Main drive belt

Pickup drive belt

Chapters

Table of Contents

Imagerunner 7105 Imagerunner 7086