Canon imageRUNNER 7095 Service Manual page 538

Chapter 17
Indication EX: ST-XXXX 1 <-( 0) [0 to 0]
[1] [2]
[1] status indication; 0: not installed (default); 1: installed
[2] invalidation execution; 0: invalidation execution (accepts only 0)
<Invalidation Transfer>
1) Select SET-XXXX, and type in '0'; then press the OK key.
2) See that TR-XXXX indicates a license number (24 characters) for transfer.
Sub item
TR-SCR for encryption secure print in relation to transfer invalidation, obtains a transfer license key
ST- for HDD encryption/full deletion in relation to transfer invalidation, indicates invalidation
HDCLR status/executes transfer invalidation
TR- for HDD encryption/full deletion in relation to transfer invalidation, obtains a transfer license
HDCLR key
ST- for BarDIMM in relation to transfer invalidation, obtains a transfer license
BRDIM
TR- for BarDIMM in relation to transfer invalidation, obtains a transfer license key
BRDIM
ST-VNC for VNC in relation to transfer invalidation, indicates installation status/executes transfer
invalidation
TR-VNC for VNC in relation to transfer invalidation, obtains a transfer license key
ST-WEB for the Web browser in relation to transfer invalidation, indicates installation status/executes
transfer invalidation
TR-WEB for the Web browser in relation to transfer invalidation, obtains a transfer license key
ST- for the trial SEND function in relation to transfer invalidation, indicates installation status/
TRSND executes transfer invalidation
TR- for the trial SEND function in relation to transfer invalidation, obtains a transfer license key
TRSND
ST- for the background print function in relation to transfer invalidation, indicates installation status/
WTMRK executes transfer invalidation
TR- for the background print function in relation to transfer invalidation, obtains a transfer license
WTMRK key
<ACCPST-D>
Sub item
ACC1 to Use it to set the order of connection of ARCNET accessories (delivery system).
ACC8
Sets the order of connection of delivery accessories connected to the ARCNET network,
starting from the host machine moving upstream.
Be sure to use the item at time of installation or when you have replaced the DC controller PCB
or initialized the RAM; otherwise, the break in the ARCNET network between the host
machine and accessories will prevent the use of accessories.
<Procedure>
1) Of ACC1 through ACC8, select the item for which the name of the accessory in question is
indicated.
2) Check to find out the position of the accessory with reference to the host machine, and type
in the number indicating its order.
3) Press the OK key.
4) Turn off and then back on the host machine and the accessory in the correct sequence.
settings 0 to 99
17-76
COPIER > OPTION > LCNS-TR
Description
T-17-54
COPIER > OPTION > ACCPST-D
Description
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
Level
1