Canon imageRUNNER 7095 Service Manual page 282

4) Remove the bearing [4] and spacer [5]; then,
detach the lower feeding right clutch [6].
[5]
[4]
F-8-136
8.11.22.11 Removing the Pre-Confluence
Sensor
1) Disconnect the connector [1] from the bottom
of the duplexing unit; then, remove the screw
[2], and detach the preconfluence sensor [3].
F-8-137
8.11.22.12 Removing the Post-
Confluence Sensor
1) Remove the two screws [1] from the bottom of
the duplexing unit; then, detach the left deck
feeding roller assembly [2].
[1]
[2]
[1]
F-8-138
[6]
0010-9374
[1]
[3]
[2]
0010-9375
2) Disconnect the connector [3]; then, remove the
screw [4], and detach the postconfluence sensor
[5].
[5]
[4]
F-8-139
8.11.22.13 Removing the Front Deck
(lifter) Draw-Out Sensor
1) Disconnect the connector [1] from the bottom
of the duplexing unit; then, remove the screw
[2], and detach the front deck (left) feed sensor
[3].
F-8-140
Chapter 8
[3]
[1]
[2]
[3]
8-49
0010-9376