Canon imageRUNNER 7095 Service Manual page 161

12) Remove the screw [1], and detach the ADF
screw left cover [2].
[2]
F-5-156
13) Remove the 2 screws [1], and detach the
stream reading glass retainer [2].
14) Remove the stream reading glass [3].
15) Remove the 2 screws [4], and detach the glass
left retainer [5].
[3]
[2]
[1]
[4]
F-5-157
16) Remove the interface PCB cover.
17) Open the 2 wire saddle [1].
18) Remove the 4 screws [2], and detach the ADF
power supply cover [3] together with the
harness.
[2]
[2]
F-5-158
[1]
[4] [5]
[3] [1]
19) Free the harness from the wire saddle [1], and
remove the 6 screws [2]; then, detach the motor
support plate [3].
[2] [3]
[2]
F-5-159
20) Remove the 4 screws [1], and slide out the
ADF open/closed sensor cover [2] to the front.
F-5-160
21) Remove the 2 screws [1], and shift the
scanner motor cooling fan [2] to the side.
[1]
F-5-161
Chapter 5
[2] [1]
[1]
[2]
[1]
[2]
5-43