Resend At Soap Transmission Error - Canon imageRUNNER 7095 Service Manual

Chapter 12
(3) When jam or alarm/service call error is detected from the device, e-RDS transmits to UGW.
- Transmission of alert code(Counter information is transmitted at the same time. )
When the state of the device changes, e-RDS sends the alert code list.
The main alert codes used are Toner LOW/OUT, Jam, and Door open.
When recovering from an error, e-RDS transmits data that shows the recovering from an error again.
- Transmission of Jam log (Counter information is transmitted at the same time.)
- Transmission of Alarm log (Counter information is transmitted at the same time.)
- Transmission of Service Call (Error code) log (Counter information is transmitted at the same time.)
(4) Change of the device scheduling information
- Scheduling information can be changed by the instruction from UGW.
List of Transmissions:
Content of transmission
Communication test
Copy counter collection/transmission
Service mode counter collection/transmission
Mode counter collection/transmission
Parts counter collection/transmission
ROM version transmission
Application log
Transmission of alert code
Jam
Alarm
Error
Confirmation whether there is processing that e-
RDS executes

12.1.7 Resend at SOAP transmission error

When SOAP send error is generated by the trouble on UGW side etc. at the transmission of an alert code,
the latest three batches of data that failed in the transmission are stored in HDD, and e-RDS resends it at
prescribed intervals.
12-2
Transmission timing
When Service mode of device is
executed
Every 6 hours
Every 6 hours
Every 6 hours
Every 6 hours
Every 6 hours
When the log file size exceeds
10kbytes
When the state of the device is
changed.
When Jam occurs
When Alarm occurs
When Error occurs
Every 6 hours
0011-6837