Fixing Feeding Unit Releasing Lever Sensor; Feeding Belt - Canon imageRUNNER 7095 Service Manual

8.11.19.2 Removing the Vertical Path
Roller 2
1) Slide out the deck (right) and the caste 3/4.
2) Remove the 3 screws [1], and detach the right
lower front cover [2].
[1]
[1]
F-8-115
3) Disconnect the connector [1] and the screw [2];
then, detach the guide plate [3].
[1]
F-8-116
4) Remove the E-ring [1] at the front of the roller
shaft, and move the bearing [2] toward the
inside; then, detach the vertical path roller 2 [3].
[1]
[2]
F-8-117
8.11.20 Fixing Feeding Unit Releasing
Lever Sensor
8.11.20.1 Removing the Fixing Feeding
Unit Releasing lever Sensor
1) Slide out the fixing feeding unit from the main
body.
0010-9309
[1]
[2]
[2]
[3]
[3]
0010-9313
2) Detach the fixing feeding unit front cover.
3) Release the claw of the fixing feeding unit
releasing lever sensor [1].
[1]
F-8-118

8.11.21 Feeding Belt

8.11.21.1 Removing the Feeding Belt
1) Slide out the fixing feeding unit from the main
body.
2) Remove the fixing feeding unit front cover.
3) Disconnect the three connectors [1], and
remove the screw [2]; then, detach the harness
guide [3].
[3]
F-8-119
4) Remove the two screws [4], and detach the
fixing feeding unit releasing lever support plate
[5].
[5]
[4]
F-8-120
Chapter 8
[1]
[2]
[1]
[4]
8-45
0010-9314