Ricoh D069 Field Service Manual page 74

2. Installation
2) Select SP5-985-001 (NIC setting) and change the setting value to "1" (ON).
3) Select SP5-985-002 (USB setting) and change the setting value to "1" (ON).
4) Turn the main switch off and on.
21. Perform the Printer/Scanner settings.
1) Start the SP mode.
2
2) Select SP5-801-001 and execute the initialization.
3) Exit the SP mode, and then start the UP mode.
4) Select the "@Remote Service" ("User Tool" > "System Settings > Administrator Tools" > "Extended
Security" > @Remote Service") and select "Prohibit".
5) Exit the UP mode, and then start the SP mode.
6) Select SP5-870-003 and execute initialization for @Remote.
7) Select SP5-907-001 and specify the "Plug & Play".
8) Select SP5-870-001 and execute writing certification for `Remote.
9) Select SP5-302-002 and specify the time zone.
10) Select SP5-307-001, 003, and 004 and specify the daylight-saving-time settings.
11) Exit the SP mode and turn the main switch off and on.
12) Start the UP mode.
13) Specify the date and time with "Set Date" or "Set Time" (User Tool" > "System Settings" > "Set
Date" or "Set Time").
22. Turn the main switch off and on.
23. Check the operations.
72