Ricoh D069 Field Service Manual page 381

5807* Area Selection
Selects the display language.
2 North America, 3 Europe, 5 Asia, 6 China
5807 1
SP5-807-001 is not cleared by SP5-801-002.
NOTE: SC982 is displayed if you specify a language that is inconsistent with your local
model.
5811* Serial Num Input
5811 1 "Serial Number Input" in this section.
5812* Service TEL
Telephone
Specifies the telephone number of the service representative. (The number is displayed
5812 1
when a service call condition occurs.) To input a dash, press . To delete the current
telephone number, press .
Facsimile
5812 2
Specifies the fax number printed on user counter reports. To input a dash, press . To
delete the current fax number, press .
5824 NVRAM Upload
5824 1 "NVRAM Upload/Download" in this section.
5825 NVRAM Download
5825 1 "NVRAM Upload/Download" in this section.
5827 Program Download (
Copy the software program from the IC card to the flash ROM. To execute this SP, (1) turn
off the main power switch, (2) insert the IC card, (3) press the power key and hold it down,
5827 1 and (4) turn on the main power switch (while you keep holding the power key). The copier
reads the software program from the IC card if you turn on the copier like this. The SP mode
is automatically activated.
"Firmware Update Procedure" in this section)
System Service Mode (Basic: D067/D072)
5
189