Ricoh D069 Field Service Manual page 71

1. Open the right door [A].
2. Remove the interface cover [B] ( x 1)
3. Remove the rear cover [C] ( x 5).
4. Remove the bracket [D] at the rear left frame of the mainframe ( x 2).
5. Remove the scanner upper left cover [E].
6. Cut the opening [F] on the rear cover. This opening is for the network interfaces and the SD card slot
and the LAN cable.
• Do not cut the topmost opening [G].
7. Install the ground plate [A] ( x 2).
• Insert the upper and lower hooks in the openings [B], and fasten the upper screw first.
Printer/Scanner Unit
2
69