Ricoh D069 Field Service Manual page 383

StoS/Front Regist
6006 1
Adjusts the side-to-side registration for the front side of the original, for ARDF mode. Use
the key to select "+" or "–" before entering the value
Leading Regist
6006 2
Adjusts the leading edge registration for ARDF mode. Use the
before entering the value.
Trailing Erase
6006 3
Adjusts the trailing edge erase margin for ARDF mode. Use the
before entering the value.
S to S/ Rear Regist
6006 4
Adjusts the side-to-side registration for the 2nd side of the original, for ARDF mode. Use
the key to select "+" or "–" before entering the value
Sub-scan Magnif
6006 5
Adjusts the sub-scan magnification for the ARDF.
Origin Curl Adj
6006 6
Turns on or off the skew correction at 2nd side scanning. This SP is activated only when the
duplex mode is selected.
Skew Correction
6006 7
Adjusts the original buckle for the skew correction at 2ns side scanning. This SP is activated
only when SP6-006-006 is set to "1 (Yes)".
6009 ADF Free Run
Duplex Mode
6009 1
Performs an ARDF free run in duplex scanning mode. Press "ON" to start; press "OFF" to
stop.
Simplex Mode
6009 3
Performs an ARDF free run at simplex scanning mode. Press "ON" to start; press "OFF" to
stop.
6910* ADF Shading Time
System Service Mode (Basic: D067/D072)
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
[–3.0 to +3.0 / –1.5 / 0.1 mm/step]
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
[–0.9 to +0.9 / 0.0 / 0.1 %/step]
[0 = No / 1 = Yes]
[–20 to +20 / 0.0 / 1 mm/step]
[0 to 60 / 30 / 1 s/step]
key to select "+" or "–"
key to select "+" or "–"
5
191