Ricoh D069 Field Service Manual page 377

4903 1 Adjusts the ADS level.
4904* ADS Lower Limit
4904 1 Adjusts the ADS lower limit.
4905* ADS Area Select
Checks the whole area (0 = All) or the specific areas (1 = One) to adjust the ADS level.
The specific areas are as follows:
4905 1
• ARDF: ±37.5 mm from the center
• Platen Cover: 15 to 90 mm from the left edge
4921* Image Adj Selection
Copy
Selects which mode the settings from SP4-922 to SP4-932 are used for.
4921 1
0 = None, 1 = Text 1, 2 =Text 2, 3= Photo 1, 4 = Photo 2, 5 = Photo 3,
6 = Special 1, 7 = Special 2, 8 = Special 3, 9 = Special 4, 10 = Special 5
4922* Scanner Gamma
4922 1 Copy
Notch Selection
Selects the value of the center ID adjustment notch for the ID adjustment LEDs.
4923*
• Normally the center notch is 3 (range 1-5). If -1 is selected, each notch shifts down
(becomes lighter). If +1 is selected, each notch shifts up (becomes darker).
• This setting is applied to all image processing modes of SP4-921.
4923 1 Copy
System Service Mode (Basic: D067/D072)
[0 to 255 / 80 / 1/step]
[0 = All / 1 = One]
[0 to 10 / 0 / 1/step]
[0=System default/1=Text/2=Photo]
Selects "text" or "photo" as the priority output mode. This
setting is applied to all image processing modes of
SP4-921.
[–1 = Light / 0 = Normal / +1 = Dark]
5
185