Ricoh D069 Field Service Manual page 379

4932* Sharpness-Low ID
4932 1 Copy
4941* White Line Erase
Selects the white line erase level.
0: None, 1: Weak, 2: Strong
4941 1 • This setting is effective for all modes.
• 0: White line erase is not used, and white level correction is used instead·
• This setting is applied regardless of what mode has been selected in SP4-921.
4942* Black Line Erase
Selects the black line erase level. This setting is effective only when originals are scanned
by the DF.
4942 1
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP4-921.
SP5-XXX (Mode)
5001 All Indicators On
Turns on all LEDs. The LCD turns on or off every 3 seconds. Press the reset key to end this
5001 1
program.
5045* Display-Counter
5045 1 Displays the number of the installed couter.
5113* Optional Counter Type
System Service Mode (Basic: D067/D072)
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals
in SP4-921.
[0 to 2 / 1 / 1/step]
[0 to 3 / 2 / 1/step]
[0 or 1 / 0 / - ]
0: 1 counter, 1: 2 couters
0: None
1: Key Card20+
2: Key Card20–
11: Key Card4+
12: Key Card4–
5
187