Ricoh D069 Field Service Manual page 439

System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
System Switch 0E [SP No. 1-101-015]
No FUNCTION
0-1 Not used
2 Not used
Action when the external handset
goes off-hook
3 0: Manual tx and rx operation
1: Memory tx and rx operation (the
display remains the same)
4-7 Not used
System Switch 0F [SP No. 1-101-016]
No FUNCTION
COMMENTS
Do not change the settings.
This machine does not have the capture function.
0: Manual tx and rx are possible while the external handset
is off-hook. However, memory tx is not possible.
1: The display stays in standby mode even when the
external handset is used, so that other people can use the
machine for memory tx operation.
Note that manual tx and rx are not possible with this setting.
Do not change these settings.
Bit Switches
COMMENTS
7
247