Ricoh D069 Field Service Manual page 473

Select IP FAX Delay Level
Bit3 Bit2 Bit1
0 0 0
0 0 0
0-3
0 0 1
0 0 1
4-7 IP Fax preamble wait time setting
IP Fax Switch 02 [SP No. 1-111-003]
No. FUNCTION
IP Fax bit signal reverse setting
0 0: Maker code setting
1: Internal bit switch setting
IP Fax transmission speed setting
1 0: Modem speed
1: No limitation
SIP transport setting
2 0: TCP
1: UDP
Raise the level by selecting a higher setting if too
many transmission errors are occurring on the
Bit0 Setting
network.
If TCP/UDP is enabled on the network, raise this
0 Level 0
setting on the T.30 machine. Increasing the delay
1 Level 1
time allows the recovery of more lost packets.
If only UDP is enabled, increase the number of
0 Level 2
redundant packets.
1 Level 3
Level 1 to 2: 3 Redundant packets
Level 3: 4 Redundant packets
Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary switch
combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
When "0" is selected, the bit signal reverse method
is decided by the maker code.
When "1" is selected, the bit signal reverse method
is decided by the internal bit switch.
(When communicating between IP Fax devices, LSB
first is selected.)
Selects the transmit speed for IP Fax communication.
This bit switch sets the transport that has priority for
receiving IP Fax data.
This function is activated only when the sender has
both TCP and UDP.
Bit Switches
COMMENTS
7
281