Ricoh D069 Field Service Manual page 285

MF Keycard Japan Only
Job Permit Setting
Sets up operation of the machine with a keycard.
5490
[0 to 1/0/1]
0: Disabled. Cancels operation if no code is input.
1: Enabled. Allows operation if another code is input and decrements the counter once for
use of the entered code.
5501 PM Alarm Interval
001 Printout
002 ADF
5504 Jam Alarm
Sets the alarm to sound for the specified jam level (document misfeeds are not included).
001 [ 0 to 3 / 3 / 1 /step]
0: Zero (Off), 1: Low (2.5K jams), 2: Medium (3K jams), 3: High (6K jams)
5505* Error Alarm
Sets the error alarm level.
The error alarm counter counts "1" when any SC is detected. However, the error alarm
counter decreases by "1" when any SC is not detected during specified sheets of copies (for
001
example, default 1500 sheets).
The error alarm occurs when the SC error alarm counter reaches "5".
[0 to 255 / 10 / 100 copies per step]
5507 Supply Alarm
CTL -
[ 0 to 9999 / 0 / 1 /step]
0: Alarm off
1 to 9999: Alarm goes off when the PM counter reaches the
specified value (1 to 9999) x 1000.
[ 0 or 1 / 1 / – ]
0: No alarm sounds
1: Alarm sounds after the number of originals passing through
the A(R)DF ≥ 10,000
CTL -
CTL -
System Service Mode (F/SPF: D068/D069)
5
93