Ricoh D069 Field Service Manual page 388

5. Appendix: SP Mode Tables
7807 Reset–SC/Jam Counters
Resets the SC, paper, original, and total jam counters. When the program ends normally,
7807 1 the message "Completed" is displayed. SP7-807-1 does not reset the following logs:
SP7-507 (Display-Paper Jam History) and SP7-508 (Display-Original Jam History).
7808 Reset–Counters
Resets all counters except for the management counters. The management counters are
the counters that are not changed by NVRAM Download (SP5-825-001;
7808 1
Data Upload/Download"). When the program ends normally, the message "Completed"
is displayed.
7810 Reset–Key Op Code
5
Resets the key operator code. Use SP7-810-1 when the customer has forgotten the key-
operator code. If the customer has forgotten the key operator code, a new one can be
specified by using: User Tools: System Settings → Key Operator Tools → Key Operator
7810 1
Code → On → Enter Key Operator Code. When the program ends normally, the message
"Completed" is displayed, if the program ends abnormally, an error message is displayed.
7832* Display-Self-Diag
Displays the SC codes and the number of their occurrences. Each number is in the range
7832 1
of 0 to 9999.
Dsply–Info Count
7991*
Displays the total operating time or the total number of operations. The time is displayed
in the following format: day: hour: minute: second.
Dsply-Timer Count
7991 1
The total of the time when the main switch is kept on (excluding the time when the safety
switch is off).
Dsply-ID S Work
7991 3
The total of the time when the ID sensor is working.
Dsply-Dev Counter
7991 4
The total number of paper outputs.
196
"NVRAM