Ricoh D069 Field Service Manual page 310

5. Appendix: SP Mode Tables
Product ID
003
Sets the product ID.
[0x0000 to 0xFFFF/1] DFU
Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
004
[0000 to 9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number recognized
as the BCD.
Delivery Server Setting
5845
Provides items for delivery server settings.
5
FTP Port Num
001
Sets the FTP port number used when image files to the Scan Router Server.
Srv IP (Primary)
002
Use this SP to set the Scan Router Server address. The IP address under the transfer tab can
be referenced by the initial system setting.
Retry Interval
003
Specifies the interval time for sending the scanned image data to the deliver server or
SMTP/FTP/NCP/SMB server after sending error.
No. of Retries
004
Specifies the retry times for sending the scanned image data to the deliver server or SMTP/
FTP/NCP/SMB server after sending error.
DeliErr DispTime
Use this setting to determine the length of time the prompt message is displayed when a
006
test error occurs during document transfer with the NetFile application and an external
device.
Svr IP (Secondary)
Specifies the IP address assigned to the computer designated to function as the secondary
008
delivery server of Scan Router. This SP allows only the setting of the IP address without
reference to the DNS setting.
118
CTL
CTL
CTL -
[ 0 to 65535 / 3670 / 1 /step]
Range: 000.000.000.000 to 255.255.255.255
[60 to 999 / 300 / 1 second /step]
[0 to 99 / 3 / 1 time/step]
[0 to 999 / 300 / 1 second /step]
Range: 000.000.000.000 to 255.255.255.255