Ricoh D069 Field Service Manual page 302

5. Appendix: SP Mode Tables
Instl Error Code
Displays a number that describes the error code that was issued when either SP5816 204
or SP5816 207 was executed.
Cause
Illegal Modem
Parameter
Operation Error,
5
Incorrect Setting
208
Error Caused by
Response from GW
URL
Instl Clear
209
Releases a machine from its embedded RCG setup.
110
Code Meaning
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
Inquiry, registration attempted without acquiring
-12002
device status.
Attempted registration without execution of an inquiry
-12003
and no previous registration.
Attempted setting with illegal entries for certification
-12004
and ID2.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for external RCG is illegal
-2396 Device ID for external RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format