Ricoh D069 Field Service Manual page 376

5. Appendix: SP Mode Tables
4686 1 RED
4686 2 GREEN
4686 3 BLUE
4687* White Balance
4687 1 Adjust
4687 2 Result
5
4690 White Peek Init
4658 1 EVEN
4658 2 ODD
4658 3 RED
4658 4 GREEN
4658 5 BLUE
4693 Black Peek Init
4658 1 EVEN
4658 2 ODD
4658 3 RED
4658 4 GREEN
4658 5 BLUE
4902* Exposure Lamp ON
Turns the exposure lamp on or off. To turn on the exposure lamp, specify "1"; to turn it off
4902 1
specify "0".
4903* ADS Level
184
[128 to 383 / 256 / 1 /step]
Adjusts the coefficient of the gray balance adjustment for
the DF scanning.
[222 to 281 / 256 / 1 /step]
Adjust the correction value for the white plate adjustment.
Displays the current value of the white plate adjustment.
If SP4-428 has not been done, this value is "0".
[0 to 255 / - / 1 /step]
Displays the white offset value of the pre-offset adjustment
in the SBU.
[0 to 255 / - / 1 /step]
Displays the black offset value of the pre-offset
adjustment in the SBU.
[0: OFF / 1: ON]
[0 to 255 / 252 / 1/step]