Ricoh D069 Field Service Manual page 360

5. Appendix: SP Mode Tables
005 Bit Switch 5
bit 0
bit 1
bit 2
bit 3
5
bit 4
bit 5
bit 6
bit 7
168
DFU
Multiple copies if a paper size or type mismatch
occurs
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to print
all copies even if a paper mismatch occurs.
DFU
[PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
Increase max number of the stored jobs to 1000
jobs.
Enabled: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
DFU
Method for determining the image rotation for the
edge to bring on
Enabled: The image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs. The old models are
below:
-PCL-: Pre-04A models
Letterhead mode printing
Routes all pages through the duplex unit. If this is disabled, simplex pages or the last
page of an odd-paged duplex job, are not routed through the duplex unit. This could
result in problems with letterhead / pre-printed pages.
0 1
- -
Disabled Enabled
(single (multiple)
copy)
- -
Pattern3 Pattern1
Enable
Disable
(100)
(1000)
- -
Disable Enable
Enable
Disable
(Duplex)