2. Installation
Installation Procedure
2
1. Remove the paper tray [A] from the main copier.
2. Turn the paper tray over to the opposite side.
3. Lower the paper tray grip handle [B] into the paper tray slot as shown, with the arrow in the above
illustration.
4. Attach the grip handle to the paper tray ( x 2).
• When attaching auxiliary handle (two screws attached from bottom), hold handle against front
of paper drawer (as screws are tightened) to ensure there is ensure the smallest gap between
back of handle and front of paper drawer.
5. Put the paper tray back into the machine.
66