Ricoh D069 Field Service Manual page 414

6. Appendix: Fax Troubleshooting Guide (Only For D068/D069)
Code
15-13 Receive Buffer Full
15-14 Mail Header Format Error
15-15 Mail Divide Error
15-16 Mail Size Receive Error
15-17 Receive Timeout
15-18 Incomplete Mail Received
6
Final Destination for Transfer
15-31
Request Reception Format Error
Send/Delivery Destination
15-39
Error
15-41 SMTP Receive Error
15-42 Off Ramp Gateway Error
15-43 Address Format Error
15-44 Addresses Over
15-61 Attachment File Format Error
222
Meaning
• Occurs only during manual reception. Transmission
• The mail header is not standard format. For example,
• The e-mail is not in standard format. There is no
• The mail cannot be received because it is too large.
• May occur during manual receiving only because the
• Only one portion of the mail was received.
• The format of the final destination for the transfer
The transmission cannot be delivered to the final destination:
• Destination file format is incorrect.
• Could not create the destination for the file
• Reception rejected because the transaction exceeded
• The delivery destination address was specified with
• Format error in the address of the Off Ramp Gateway.
• The number of addresses for the Off Ramp Gateway
• The attached file is not TIFF format.
Suggested Cause/Action
cannot be received due to insufficient buffer space. The
buffer is being used for mail send or Scan-to-Email.
the Date line description is incorrect.
boundary between parts of the e-mail, including the
header.
network is not operating correctly.
request was incorrect.
transmission.
the limit for the "Auth. E-mail RX" setting.
Off Ramp Gateway OFF.
exceeded the limit of 30.