Ricoh D069 Field Service Manual page 472

7. Appendix: Fax Service Program (Only For D068/D069)
IP Fax Transport
1
0: TCP, 1: UDP
IP Fax single port selection
2
0: OFF, 1: ON (enable)
IP Fax double ports (single data port)
selection
3
0: OFF, 1: ON (enable)
IP Fax Gatekeeper
4
0: OFF, 1: ON (enable)
IP Fax T30 bit signal reverse
5
0: LSB first, 1: MSB first
IP Fax max bit rate setting
6
0: Not affected, 1: Affected
7
IP Fax received telephone number
confirmation
7
0: No confirmation,
1: Confirmation
IP-Fax Switch 01
No.
280
FUNCTION
Selects TCP or UDP protocol for IP-Fax
Selects single data port.
Selects whether IP-Fax uses a double port.
Enables/disables the communication via the
gatekeeper for IP-Fax.
Reverses the T30 bit signal.
When "0" is selected, the max bit rate does not affect
the value of the DIS/DCS.
When "1" is selected, the max bit rate affects the
value of the DIS/DCS.
When "0" is selected, fax data is received without
checking the telephone number.
When "1" is selected, fax data is received only when
confirming that the telephone number from the
sender matches the registered telephone number in
this machine. If this confirmation fails, the line is
disconnected.
COMMENTS