Ricoh D069 Field Service Manual page 317

Remote ROM Update
5856
Allows the technician to upgrade the firmware using a parallel cable when updating the
remote ROM.
002 Local Port
5857 Debug Log Save
ON/OFF
001
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the event selected
by SP5858 will be stored if an error is generated
002
[2 to 3 /1]
2: HDD
3: SD Card
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Specifies the debug log number for saving to an SD card.
HDD to SD Card Latest
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD
Card.
009
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
System Service Mode (F/SPF: D068/D069)
[0 or 1 / 0 / 1/step]
CTL 0: Disallow
1: Allow
CTL -
0: OFF, 1: ON
5
125