Ricoh D069 Field Service Manual page 259

2213* Outputs After NE
[0 = 50 pages / 1 = 20 sheets]
Sets the number of copy/print/fax pages that can be made after toner near-end has been
2213 1
detected. Reduce the number of pages if the user normally makes copies with a high image
ratio.
2214 Develpr Initialize
Initializes the TD sensor toner supply target voltage and the TD sensor gain value. Execute
2214 1
this SP replacing the developer or the TD sensor.
2221 ID Error Analysis (
2221 1 Vsg
2221 2 Vsp
2221 3 PWM
2221 4 Vsdp
2221 5 Vt
2221 6 Vts
2301* Tr Current Adj (
Normal paper
2301 1
Adjusts the current applied to the transfer roller when feeding from a paper tray. Use a
high setting if the user normally feeds relatively thick paper (within spec) from a paper tray
Thick/Special
2301 2
Adjusts the current applied to the transfer roller when feeding from the by-pass tray. Use
a high setting (a) if the user normally feeds relatively thick paper from the by-pass tray, or
(b) if waste toner is re-attracted from the drum (which can occur when using transparencies).
"ID Sensor Error Analysis (SP2-221)")
Displays the Vsg value.
Displays the Vsp value.
Displays the PWM value.
Displays the Vsdp value.
Displays the Vt value.
Displays the Vts value.
"Image Transfer Current").
[–2 = –4 μA / –1 = –2 μA / 0 = 0 μA / 1 = 2 μA / 2
= +4 μA]
[–2 = –4 μA / –1 = –2 μA / 0 = 0 μA / 1 = 2 μA / 2
= +4 μA]
System Service Mode (F/SPF: D068/D069)
5
67