Table of Contents
Advertisement
4.2.2 Device status
Device status can check Device Model, Online Time, Device MAC and Device IP; Software name; software version; AC IP;
SSID; BSSID; Channel; Wireless Security RF Output Power; Beacon Interval; Coverage Threshold as Figure 4-1-2
P4-1-2 Device Status
4.2.3 Device Network
AC Controller's IP address is 192.168.1.1. In Device Network option, AC Controller can assign IP address for connected
wireless AP. The default IP setting is DHCP, mean wireless AP can get IP address from AC Controller in dynamic way; Then IP
address mean wireless AP's IP address. Subnet Mask mean Wireless AP's Subnet Mask.
P4-1-3
4.2.4 Wireless Basic Setting
Wireless basic setting show wireless status, like enable or disable (enabled in default); broadcast SSID is enable or disable;
Virtual AP is turned on or off; Wireless Security turn open or not.
10
Advertisement
Table of Contents
