Table of Contents
Advertisement
WAB–3000 Wireless Access Point
Services Settings
DHCP Server
The Service Settings — DHCP Server screen is used for configur-
ing the DHCP server function accessible from the Local LAN port. The
default factory setting for the DHCP server function is enabled. You can
disable the DHCP server function, if you wish, but it is not recommended.
You can also set the range of addresses to be assigned. The Lease period
(after which the dynamic address can be reassigned) can also be varied.
The DHCP server function, accessible only from the LAN port, is used
for initial configuration of the management functions.
29000171-002 A
Chapter 3: Access Point Configuration
41
Advertisement
Table of Contents
