The Component Of Switch; Front Panel; Rear Panel; Lateral Side - LevelOne GEU-2429 Manual

2 The component of Switch

2.1 front panel

 LED display panel
See chapter 4 for details

Twisted-pair cable connection
All RJ45 port have MDI, MDIX auto-calibration function, automatic transformation of the intersection
line with straight line, from the loaded down with trivial details that the cable is distinguished in the
process of the actual use.

2.2 rear panel


AC power supply input .

2.3 lateral side

On both side of the Switch has a few rows of cooling vents. Please don't block the vent, and must
guarantee with sufficient space on both sides of the switch, so that the air circulation, for ventilation and
heat dissipation. Otherwise, the internal components of the Switch may overheat, cause system can't
work normally.

2.4 Link Aggregation function

1. The Networks Switch have two different mode through a slide switch.
1.1> Normal Sharing Mode:
On the left of slide switch, all of the ports have 2000M bandwidth in full duplex.
Equivalent to an ordinary Gigabit switches, can be used in a variety of network access layer, also
can be used in small network core layer as a central switch tasks.
On the right of slide switch ,the Network Switch have trunk function.
The Uplink port ( 23p , 24p ,25p 26p) will be Link Aggregation, the bandwidth is 4000M in full duplex.
.
5