Installation Of The Right Side Cover - Barco DP2K-E series User And Installation Manual

16. Removal and installation of the projector covers

16.10 Installation of the right side cover

Necessary tools
3 mm Allen key.
How to install the right side cover?
1. Position the right side cover on the projector on an angle as shown (reference A, image 16-13). The magnetic clips will snap into
position.
Tip: Before positioning the cover into place, guide the cables (1) (power cables and data cables) underneath the projector.
When the cables are guided well, they won't obstruct the cover when installing.
Image 16-13
2. Close the cover by pushing the top firmly into place.
130
1
A
B
R5906693 DP2K-E SERIES 19/06/2015