11. Scheimpflug
If yes, the Back Focal Length is correctly adjusted.
If no, repeat with step 4.
9. Is the projected image in the corners as sharp as in the middle?
If yes, proceed with the procedure "Fixation of the Lens Holder front plate", page 84.
If no, Scheimpflug adjustment is required. See procedure "Scheimpflug adjustment", page 82, prior to fixate the Lens Holder
front plate. CAUTION: Skip the action, in the Scheimpflug adjustment procedure, to turn the three Scheimpflug adjustment nuts
until the front of the nut is equally aligned with the front of the threaded rod!
R5906693 DP2K-E SERIES 19/06/2015
89