Installation Process - Barco DP2K-E series User And Installation Manual

4. INSTALLATION PROCESS

About this chapter
After you have unpacked and checked the projector, you can start with the installation process of your DP2K-E series projector. This
chapter gives an overview of all the different stages in the installation process which you have to be followed to set your DP2K-E se-
ries projector up and running. Each stage is briefly described and refers to more detailed step by step procedures in this manual.
Use this overview as a checklist to ensure that all stages have been followed in the setup process of the DP2K-E series
projector.
Let the projector acclimatize to ambient conditions after unpacking. Neglecting this may result in a startup
failure of the light processor unit.
Overview
• Installation process overview
R5906693 DP2K-E SERIES 19/06/2015
4. Installation process
21