Introduction - Barco DP2K-E series User And Installation Manual

13. Lamp House

13.1 Introduction

Lamp House
The DP2K-E series projector is delivered with two Lamp Houses installed. The Lamp House is a consumable item of the projector.
For a better user experience, it is recommended to replace both Lamp Modules at the same time.
Lamp strike policy and lamp warning/error policy versus the lamp runtime
• The projector issues a lamp run time notification message (and have blue status LEDs) approximately 30 hours before the
maximum lamp runtime occurs.
• The projector issues a lamp run time notification message (and have blue status LEDs) when the maximum lamp runtime
occurs.
• The projector will always tries to strike the lamp, independent of the lamp runtime.
Parts identification Lamp House
1
Image 13-1
1 Retaining screws for fixation of the Lamp House
2 Handle
3 Power cable connections
4 UV/IR blocker
5 Positioning pins
100
1
2
1
3
4
5
5
R5906693 DP2K-E SERIES 19/06/2015
3