6.4
Lens removal
How to remove a lens from the Lens Holder?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle (1) towards the "unlocked" position as
illustrated.
2. Gently pull the lens out of the lens holder, maintaining its coaxial direction.
Caution:
Do not accidentally bump with the lens against the electronic boards inside the Lens Holder.
1
Image 6-9
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the removed
Lens to protect the optics of the Lens.
It's recommended to place the plastic cover of the original projector packaging, back into the Lens opening
to prevent intrusion of dust.
R5906693 DP2K-E SERIES 19/06/2015
6. Lenses & Lens selection
35